How to install cable tray fireproof partitions?

The installation method of cable tray fireproof partition is as follows: 1 Firstly, it is necessary to choose a suitable location for installation. It is best to choose above the cable tray to avoid interference with the cables. Secondly, it is necessary to ensure that the installed surface is smooth and clean, without oil stains or other impurities, which can ensure the sealing and stability of the fireproof partition. During the installation process, suitable tools such as manual or electric drills, screwdrivers, etc. need to be used. When installing fireproof partitions, it is necessary to choose the appropriate size and thickness according to the actual situation. Generally speaking, the size of fireproof partitions should be determined based on the size of cable trays and the number of cables that need to be protected. 5. Finally, a check is required after installation is completed. It is necessary to check whether the fireproof partition is tight and meets relevant safety requirements to ensure that it can effectively prevent the spread of fire. It should be noted that during the installation process, relevant safety regulations and standards should be followed to ensure that the installation process will not cause harm or impact to personnel and equipment. Meanwhile, the installation methods for different types of cable trays and fire-resistant partitions may vary, and specific operations should be carried out according to the guidance in the product manual.